Homopolymer Random Copolymer Impact Copolymer
Homopolymer
PROCESS GRADE M.F.I.
g/10 min.
ASTM D 1238		 SPECIAL CHARACTERISTICS TYPICAL APPLICATIONS
Injection Moulding H033MA 3.3 Good rigidity, contains antistat Industrial Products
Injection Moulding H060MG 6.0 Good processability General purpose injection moulding
Injection Moulding H110MA 11.0 Good rigidity, good gloss, contains antistat Rigid Packaging, Furniture, Housewares
Injection Moulding H200MA 20.0 Good flow behaviour, contains antistat Closures, Thin wall containers, Multicavity Moulding
Extrusion H007EA 0.7 Low water carry-over, low odour Sheet, Thermoforming, Pipes
Extrusion H020EG 2.0 Good rigidity and processability Sheets, Strappings, Tubings, Blow Moulded bottles
TQ Film H100EY 11.0 Good clarity, contains slip and antiblock Textile overwraps, Garment bags, Snack food packaging
BOPP Film H029SG 2.9 Good Processability, low gels Cigarette overwraps, Lamination, Food packaging, Adhesive tapes, Synthetic paper
Oriented Tapes H030SG 3.0 Low water carry-over Woven fabric & sacks for packaging
Oriented Tapes H030SU 3.0 Low water carry-over, UV stabilized Woven fabric & sacks for outdoor applications
Fibre Spinning H110FG 11.0 Optimum Stabilization Coarse denier filament yarn, General purpose yarn
Fibre Spinning H200FG 20.0 Optimum Stabilization, Excellent whiteness Staple fibre, Multifilament yarn, Carpets, Compact spinning
Fibre Spinning H350FG 35.0 Very good melt stability, Excellent whiteness Fine fibre yarn, Non woven fabric
Nomenclature
First field : Type of PP
  • H: Homopolymer
  • R: Random Copolymer
  • B: Medium Impact Copolymer
  • C: High Impact Copolymer
  • D: Extra High Impact Copolymer
 Second Field : MFI
  • MFI X 10
 Third Field : Process
  • E: Extrusion
  • M: Inj/Blow Moulding
  • S: Stretched Product
  • F: Fibre & Filament
 Fourth Field : Additive
  • A: Antistat
  • G: Normal Package
  • K: Clarifier & Antistat
  • N: Nucleating Agents
  • T: Long term Heat Stabilizer
  • U: UV Stabilizer
  • Y: Slip & Antiblock
  • Z: Clarifier
Top  
Random Copolymer
PROCESS GRADE M.F.I.
g/10 min.
ASTM D 1238		 SPECIAL CHARACTERISTICS TYPICAL APPLICATIONS
Injection Moulding R120MK 12.2 Excellent Clarity, contains Antistat, Good Processability Rigid Containers, Housewares, Syringes, Tooth Brush Handles
Injection Moulding R200MK 20.0 Excellent Clarity, High Flow and Good Impact Strength General purpose, Housewares, Thin-Wall Containers, Syringes, Labwares
Blow Moulding R019MZ 1.9 Low Odour, contains Clarifier High Clarity Bottles, Containers, Sheets
Blow Moulding R070EY 7.0 Low Heat-Seal Temperature, contains Slip and Antiblock Heat seal coating, OPP Film
Nomenclature
First field : Type of PP
  • H: Homopolymer
  • R: Random Copolymer
  • B: Medium Impact Copolymer
  • C: High Impact Copolymer
  • D: Extra High Impact Copolymer
 Second Field : MFI
  • MFI X 10
 Third Field : Process
  • E: Extrusion
  • M: Inj/Blow Moulding
  • S: Stretched Product
  • F: Fibre & Filament
 Fourth Field : Additive
  • A: Antistat
  • G: Normal Package
  • K: Clarifier & Antistat
  • N: Nucleating Agents
  • T: Long term Heat Stabilizer
  • U: UV Stabilizer
  • Y: Slip & Antiblock
  • Z: Clarifier
Top  
Impact Copolymer
PROCESS GRADE M.F.I.
g/10 min.
ASTM D 1238		 SPECIAL CHARACTERISTICS TYPICAL APPLICATIONS
Injection Moulding B030MG 3.0 Medium Impact Copolymer Furniture, Industrial Products
Injection Moulding C051MA 5.1 High Impact Copolymer, contains Antistat, Low Blush Furniture, Moulded Luggage, Industrial Products
Injection Moulding C080MT 8.0 High Impact Copolymer, Heat Resistant Batteries, Automotive Parts
Injection Moulding B120MA 12.0 Medium Impact Copolymer, contains Antistat Furniture, Housewares, General Purpose Moulding
Injection Moulding D120MA 12.0 Extra High Impact Copolymer, contains Antistat Industrial Components, Moulded Luggage
Injection Moulding B220MN 22.0 Medium Impact Copolymer, Nucleated for faster Moulding Cycle Rigid Packaging, Automotive Parts, Seating, Large Appliances
Extrusion C015EG 1.5 High Impact Copolymer Sheets for Thermoforming, Fluted Sheets
 
First field : Type of PP
  • H: Homopolymer
  • R: Random Copolymer
  • B: Medium Impact Copolymer
  • C: High Impact Copolymer
  • D: Extra High Impact Copolymer
 Second Field : MFI
  • MFI X 10
 Third Field : Process
  • E: Extrusion
  • M: Inj/Blow Moulding
  • S: Stretched Product
  • F: Fibre & Filament
 Fourth Field : Additive
  • A: Antistat
  • G: Normal Package
  • K: Clarifier & Antistat
  • N: Nucleating Agents
  • T: Long term Heat Stabilizer
  • U: UV Stabilizer
  • Y: Slip & Antiblock
  • Z: Clarifier
Top 
Home : Product Specifications : Repol(PP)

Back